Cement Based Systems
A range of waterproof polymers, modified cement based coatings and repair mortars that can resist up to 100m head of negative water pressure. Cold applied by brush, notched trowel or spray; the coatings form a seamless, fully bonded, tough, resilient but flexible waterproof polymer solution to waterproofing basements, substructures, podium decks, and water containing structures.
For more information about waterproof polymers please contact the RIW Technical Department.
Documents
| Product Name | Product Data Sheet | SDS/MSDS | DoP | NBS Clause |
| Cementfill FC Data Sheet | ||||
| Cementfill HB Data Sheet | ||||
| Cementflex Data Sheet | ||||
| Cementseal Data Sheet | ||||
| Cementseal Primer Data sheet |
Safety Data sheets
| Product Name | |
| Cementfill FC Safety Data sheet | |
| Cementfill HB Safety Data Sheet | |
| Cementflex Part A Safety Data Sheet | |
| Cementflex Part B Safety Data sheet | |
| Cementseal Part A Safety Data Sheet | |
| Cementseal Part B Safety Data sheet | |
| Cementseal Primer Safety Data sheet |
Products
- Product Name
- Description
- Key Benefits
- Applications Type
Cementfill FC is a single component, thixotropic, polymer modified, cement based waterproof repair mortar with high adhesive properties.
- Totally waterproof
- Resists up to 100m head of positive and negative water pressure
- Suitable for horizontal, vertical and overhead applications
- Can be feather edged
- Applied to damp surfaces
- Environmentally friendly
- Fairing coat to fill minor holes and defects
- Repair surface cavities and honeycombed concrete
- Waterproof screed
Cementfill HB is a single component, thixotropic, polymer modified cement based rapid hardening waterproof high build repair mortar.
- Totally waterproof
- Resists up to 100m head of positive and negative water pressure
- 5 to 80mm build up in horizontal, vertical and overhead applications
- Excellent low sag properties
- Applied to damp surfaces
- Environmentally friendly
- High build structural repair mortar
- Rendering and profiling vertical, horizontal and overhead applications
- Fillets at internal corners
Cementflex is a two component, polymer rich and flexible cement based waterproof coating for concrete and masonry, with excellent adhesion to prepared substrates. Cementseal Primer is required for all horizontal applications, and is also used on porous surfaces, prior to applying Cementflex.
- Totally waterproof
- Resists up to 100m head of positive and negative water pressure
- Flexible to accommodate differential movement
- Seamless and fully bonded
- Applied to damp surfaces
- Tough with good abrasion and impact resistant
- Quick and suitable for horizontal, vertical and overhead applications
- Easy to apply by hand or spray
- Environmentally friendly
- Enhanced resistance to carbonation
- Basements & sub-structures
- Podium decks
- Balconies & terraces
- Inverted roofs
- Temporary waterproofing
Cementseal is a two component, polymer modified cement based waterproof coating for concrete and masonry, with excellent adhesion to prepared substrates. Cementseal Primer is required for all horizontal applications, and is also used on porous surfaces, prior to applying Cementseal.
- Totally waterproof
- Resists up to 100m head of positive and negative water pressure
- Seamless and fully bonded
- Applied to damp surfaces
- Abrasion and impact resistant
- Quick and easy to apply by hand or spray
- Suitable for horizontal, vertical and overhead applications
- Environmentally friendly
- Enhanced resistance to carbonation
- Basements & sub-structures
- Podium decks
- Balconies & terraces
- Inverted roofs
- Temporary waterproofing