TYTRO WR 112 is a polycarboxylate-based high-range water-reducing admixture specifically formulated to provide prolonged workability, excellent plasticity and extended slump life in underground shotcrete applications.
Featuring the latest in the polycarboxylate technology, TYTRO WR 112 provides superior water reducing performance to shotcrete.
Manufactured under closely controlled conditions to provide uniform, predictable performance, GCP’s TYTRO WR 112 contains no added chlorides.
TYTRO WR 112 is used in all shotcrete applications where it is desired to minimize the water-to-cementitious materials ratio yet maintaining workability, especially in the following applications:
The dosage of TYTRO WR 112 can vary based on the mix design, cementitious content, water-to-cementitious materials ratio, aggregate gradations and slump required.
The dosage of TYTRO WR 112 normally ranges between 0.4% and 0.9% by the total weight of cementitious materials. At a given water/cement ratio, the slump required for placement can be controlled by varying the addition rate. Should conditions require using more than the recommended addition rates, please consult your GCP representative.
GCP recommends that trials be performed with cement and aggregates under local conditions before use to assess and optimize dosage rates and performance.
In general, it is recommended that TYTRO WR 112 be added to the mix near the end of the batch sequence for optimum performance.
It is recommended that TYTRO WR 112 be introduced into the mixer by means of automatic dispensing equipment.
TYTRO WR 112 is available in bulk, totes, and drums.
TYTRO WR 112 should be stored at a temperature range of 2°C to 35°C
If TYTRO WR 112 freezes, it will return to full effectiveness after thawing and thorough mechanical agitation. It is recommended that your local GCP sales representative be consulted prior to the use of any products that may have been frozen. Performance tests should always be carried out prior to use.
TYTRO WR 112 must be kept in closed plastic containers or closed tanks.
If stored in tightly closed original containers and under the above mentioned conditions, TYTRO WR 112 has a shelf life of at least 12 months.
Please contact your local GCP sales representative regarding the suitability for use if the shelf life of TYTRO WR 112 has been exceeded.
Avoid eye and skin contact and wear rubber gloves and safety glasses when handling this product. If contact occurs, rinse with plenty of water and seek medical advice.
For further information, refer to the Material Safety Data Sheet or contact your local GCP representative.
TYTRO WR 112 is compatible with all GCP TYTRO sprayed concrete admixtures
GCP recommends that a suitable alkali-free set accelerator and a hydration control admixture be incorporated into the shotcrete mix to achieve the required strength performance and setting characteristics. TYTRO SA series of high performance set accelerator along with TYTRO HC series of hydration stabilizing admixtures are recommended for this purpose. For shotcrete requiring air entrainment, the use of TYTRO AE series is recommended to provide desired air content and air-void system for resistance against freezing and thawing cycles.
Pretesting of the shotcrete mix should be performed before use and as conditions and materials change in order to ensure compatibility with other admixtures.
For use with other shotcrete admixtures systems, we recommend you contact GCP for further advice.
| Colour | Amber / Straw |
| Specific Gravity | 1.08 |
| pH (20°C) | 4.5 |
| Chloride Content | Nil |
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
TYTRO is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies (UK) Ltd., 830 Birchwood Boulevard, Birchwood, Warrington, WA3 7QZ United Kingdom
This document is only current as of the last updated date stated below and is valid only for use in the United Kingdom. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.uk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2023-06-13
https://gcpat.uk/en-gb/solutions/products/tytro-shotcrete-system/tytro-wr-112