QUANTEC XL-540 is a chloride based accelerator which produces more rapid set and early strength gain characteristics.
QUANTEC XL-540 is suitable for use in light precast production where reductions in setting time may be beneficial.
QUANTEC XL-540 is intended for use in block mix concretes, and in low slump concrete systems involving vibro-compression and instant de-moulding.
QUANTEC XL-540 is manufactured under carefully controlled conditions, to pro duce a highly consistent product. This admixture is not suitable for mixes/ products that will contain embedded metals.
| Appearance | Pale straw liquid |
| Specific Gravity (20°C) | 1.36 |
| Air Entrainment | Minimal in semi-dry |
| Chloride Content | 22% by weight of admixture |
| Freezing Point | 0ºC |
QUANTEC XL-540 is supplied ready for use and should be added to the mix after the addition of the cementitious component, at the same time as the mixing water.
Overdosing in semi-dry mixes will yield a more plastic mixture. This could result in edge slumping of cast masonry units and a significant reduction in usable life and setting time, with higher early strengths.
| Range | 1600 ml - 3200 ml per 100 kg cement |
| For best results, it is recommended that QUANTEC XL-540 performance first be assessed in preliminary tests using the actual mix constituents. This will help determine the optimum dosage. | |
| For advice and assistance with trials we recommend that you consult GCP Applied Technologies. | |
QUANTEC XL-540 can be used with all types of Portland cement, including cement replacement materials.
For use with special cements we recommend that you consult GCP Applied Technologies.
QUANTEC XL-540 should not be pre-mixed with other admixtures prior to addition to the mix.
The performance of the admixture may be affected by the presence of other chemicals, and we recommend that GCP be consulted in such circumstances.
It is preferable that liquid admixtures for concrete should be introduced into the mixer by means of automatic dispensing equipment.
QUANTEC XL-540 is supplied in 205 litre non-returnable containers.
Alternatively, bulk deliveries can be arranged.
QUANTEC XL-540 should be stored above 0°C and protected from frost.
12 months from date of manufacture.
12 months from date of delivery.
For further information on Health and Safety matters regarding this product we recommend that you consult the relevant Material Safety Data Sheet from GCP.
In line with general chemical handling precautions avoid contact with skin or eyes and protective gloves/goggles should be worn.
Our Technical Service department of GCP Applied Technologies is available to assist you in the correct use of our performance chemicals.
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
QUANTEC is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies (UK) Ltd., 830 Birchwood Boulevard, Birchwood, Warrington, WA3 7QZ United Kingdom
This document is only current as of the last updated date stated below and is valid only for use in the United Kingdom. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.uk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2023-06-13
https://gcpat.uk/en-gb/solutions/products/quantec-xl-540