ADVA® Floor 200

High Range Water Reducer / Superplasticiser for Concrete Floors

Product Description

ADVA® FLOOR 200 is a high range water-reducer intended for concrete floor applications. It is designed to impart neutral set and then dramatic improvements in finishing properties to concrete, enabling placement of concrete and power-floating operations to be carried efficiently.

ADVA® FLOOR 200 is based on a synthetic carboxylated polymer formulated with a powerful deflocculant. ADVA® FLOOR 200 conforms to EN 934-2 and manufactured under controlled conditions to give a consistent product..

Advantages

  • ADVA® FLOOR 200 ensures that the floor finishing operations are easier and quicker and reduces delays prior to power-floating
  • Aids cohesion and pumping operations
  • ADVA® FLOOR 200 is highly efficient and enables the production of high slump concrete
  • Plasticised concretes using ADVA® FLOOR 200 have notably improved finishing characteristics. Normal pump mixes are recommended
  • ADVA® FLOOR 200 is a finishing enhancer with a combined superplasticising effect which allows for high range water reductions leading to considerable increase in compressive strength
  • Impermeability and the concrete durability are correspondingly improved.

Typical Properties

ADVA® FLOOR 200
Appearance Brown liquid
Specific Gravity (20°C) 1.085
Alkali Content (eq.Na20) 1.50%
Chloride Content Nil
Air Entrainment 1.0-2.0%
Freezing Point 0°C

Method Of Use

ADVA® FLOOR 200 is supplied ready for use.

When producing high consistence concrete or concrete of low w/c ratio it is recommended that ADVA® FLOOR 200 be added in its supplied form with part of the batching water, after the addition of the cementitious component. After the addition of admixture, a further mixing cycle of at least two minutes to enable the ADVA® FLOOR 200 to efficiently disperse the mix components.

Compatibility with Cements

ADVA® FLOOR 200 can be used with most types of Portland cements. It is also effective in concrete containing fuel ash or ground granulated blastfurnace slag.

Compatibility with Other Admixtures

ADVA® FLOOR 200 is fully compatible with other products normally used in flooring concrete, including ECLIPSE® Floor Shrinkage Reducing, DCI® Corrosion Inhibitor GCP MICROFIBER® and air entraining admixtures. Each admixture must be added separately. Individually added, each will deliver exactly the results desired. However, the performance of the material may be affected by the presence of other chemicals and we would recommend that GCP Applied Technologies be consulted in such circumstances.

Addition Rates

Range 400 ml -1200 ml per 100 kg cement
0.40%-1.20% (v/w) by wt. of cement
As a guide to trials an addition rate of 0.60-0.80% volume by weight of cement is suggested.
For advice and assistance with trials we recommend that you consult GCP Applied Technologies.

As with most products of this type, the magnitude of the effect obtained with ADVA® FLOOR 200 is governed by the quantity of product used, w/c ratio, and specific nature of the concrete and constituent materials. It is necessary therefore to assess performance under site conditions using actual materials to determine optimum dosage and effect on plastic/ hardened concrete properties, such as cohesiveness, consistence retention, set characteristics, early rate of strength gain, ultimate compressive strength and shrinkage when these are of
consequence.

Effects of Overdosing

The effect of overdosing ADVA® FLOOR 200 is a function of the degree of overdose.

When producing high consistence concrete, overdosing will increase the level of consistence and may induce the onset of segregation. Depending on the extent of the overdose, an increase in setting time may also occur, especially in low ambient temperatures and/or when employing Sulfate-resisting Portland cements or cement replacement materials. Any situation where an overdose is suspected, careful inspection of the concrete in its plastic state should be conducted. Particular attention to consistency and cohesiveness prior to a decision
on the suitability of the concrete for the particular application in question.

Dispensing

It is preferable that the ADVA® FLOOR 200 should be introduced into the mixer by means of automatic dispensing equipment. Equipment or advice on dispensing can be obtained from GCP Applied Technologies.

Health and Safety

For further information on Health and Safety matters regarding this product we recommend that you consult the relevant Safety Data Sheet from GCP. In line with general chemical handling precautions avoid contact with skin or eyes and protective gloves/goggles should be worn.

Packaging and Storage

ADVA® FLOOR 200 is supplied in 15 or 205 non returnable drums and 1,000 litre totes. Alternatively, bulk deliveries can be arranged. ADVA® FLOOR 200 should be stored away from extremes of temperature and then protected from frost. The product should be kept out of direct sunlight in shaded storage at all times.

Storage Life in Manufacturer ‘s Drums :
12 months from date of manufacture.

Storage Life in Bulk Storage:
12 months from date of delivery.

Technical Service

Our Technical Service department of GCP Applied Technologies is available to assist you in the correct use of our performance chemicals.

 

gcpat.uk | United Kingdom customer service: +44 (0) 1480 478421

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement,recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

ADVA is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2020 GCP Applied Technologies Inc. All rights reserved.

GCP Applied Technologies (UK) Ltd, Gate St, Dukinfield SK16 4RU.

This document is only current as of the last updated date stated below and is valid only for use in the United Kingdom. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.uk. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2022-11-24

https://gcpat.uk/en-gb/solutions/products/adva-high-range-water-reducers/adva-floor-200