Product Description
ADVA® FLOW 261 is a high performance high efficiency, new generation admixture designed to impart extremely high consistence enabling the production of flowing and self compacting concrete.
Designed to provide excellent cohesion and offers extended consistence retention properties. When used at the controlled dosage range will provide consistence retention with minimal variance, across most cement classifications.
ADVA® FLOW 261 is based on next generation modified synthetic carboxylated polymers and offer concrete producers the advantages of the latest advances in concrete technology.
Advantages
- ADVA® FLOW 261 is especially suitable for producing high consistence concrete, with excellent rheology and consistence / flow retention properties
- ADVA® FLOW 261 will offer controlled consistence retention with minimal variance over time
- Minimal impact on setting time
- Improved segregation resistance
- Suitable for use in concrete containing fly ash, ggbs or silica fume
- Dose efficient.
Typical Properties
ADVA® FLOW 261 |
Appearance |
Amber / Straw Liquid |
Specific Gravity (20°C) |
1.06 |
Alkali Content (eq.Na20) |
0.50% |
Chloride Content |
Nil |
Air Entrainment |
1.0 % |
Freezing Point |
0°C |
Method Of Use
ADVA® FLOW 261 is supplied ready for use.
When producing high consistence concrete or concrete of low w/c ratio it is recommended that ADVA® FLOW 261 be added in its supplied form with part of the batching water, after the addition of the cement. After the addition of admixture, a further mixing cycle of at least two minutes is suggested to enable the ADVA® FLOW 261 to efficiently disperse the mix components. Compatability with Cements ADVA® FLOW 261 can be used with most types of Portland cements, effective in concrete containing fly ash or ground granulated blastfurnace slag. For use with special cements we recommend contacting GCP.
Compatability with Other Admixtures
ADVA® FLOW 261 should not under any circumstances be premixed with other admixtures. The performance of the product will be affected by the presence of other chemical admixtures. We recommend that all admixtures be added separately into the mix.
Addition Rates
Range |
600 ml -1200 ml per 100 kg cement |
0.60% -1.20% (v/w) by wt. of cement |
As a guide to trials an addition rate of 0.70 - 1.00% volume by weight of cement is suggested. |
For advice and assistance with trials we recommend that you consult GCP Applied Technologies. |
As with most products of this type, the magnitude of the effect obtained with ADVA® FLOW 261 is governed by the quantity of product used, w/c ratio, and specific nature of the concrete and constituent materials. It is necessary therefore to assess performance under site conditions using actual materials to determine optimum dosage and effect on plastic/ hardened concrete properties, such as cohesiveness, consistence retention, set characteristics, early rate of strength gain, ultimate compressive strength and shrinkage when these are of consequence.
Effects of Overdosing
The effect of overdosing ADVA® FLOW 261 is a function of the degree of overdose. When producing high consistence concrete, overdosing will increase the level of consistence and may induce the onset of segregation. Depending on the extent of the overdose, an increase in setting time may also occur, especially in low ambient temperatures and/or when employing Sulfate-resisting Portland cements or cement replacement materials. Any situation where an overdose is suspected, careful inspection of the concrete in its plastic state should be conducted. Particular attention to consistency and cohesiveness prior to a decision on the suitability of the concrete for the particular application in question.
Dispensing
It is preferable that ADVA® FLOW 261 be introduced into the mixer by means of automatic dispensing equipment. Equipment or advice on dispensing can be obtained from GCP Applied Technologies.
Health and Safety
For further information on Health and Safety matters regarding this product we recommend that you consult the relevant Safety Data Sheet from GCP Applied Technologies. In line with general chemical handling precautions avoid contact with skin or eyes and protective gloves/goggles should be worn.
Packaging and Storage
ADVA® FLOW 261 is supplied in both 15 or 205 non returnable drums and 1,000 litre totes. Alternatively, bulk deliveries can be arranged. ADVA® FLOW 261 should when possible be stored away from extremes of temperature and then protected from frost. The product should be kept out of direct sunlight in shaded storage at all times.
Storage Life in Manufacturer ‘s Drums :
12 months from date of manufacture.
Storage Life in Bulk Storage:
12 months from date of delivery.
Technical Service
Our Technical Service department of GCP Applied Technologies is available to assist you in the correct use of our performance chemicals.